Spring Hoe Kit

Both Right and Left Spring Hoes for one row. The Kit includes 2 right and 2 left spring hoes and 2 mounting plates that complete spring hoe parts for one row.

Includes Hardware for Spring Hoes and Shank/Clamp

This Kit includes 2 right spring hoes and 1 mounting plate for one side.

Includes Hardware for Spring Hoes and Shank/Clamp

This Kit includes 2 left spring hoes and 1 mounting plate for one side.

Includes Hardware for Spring Hoes and Shank/Clamp

Shank not included.

Includes 2 shank for right and left spring hoes. Pair with flex-tine mounts for greater flexibility in rocky conditions.

Dimensions: 13.56" x 1.19" x .375"

Includes 2 Shanks for Right and Left Spring Hoes.
Dimensions: 13.56" x 1.19" x .375" with a .44" offset where the implement mounts.

Includes 2 shanks for right and left hoes.  
For walk-behind toolbars. 
Dimensions: 1/2" x 1-1/4" x 13-3/4"

Includes 2 shanks for right and left spring hoe.
1-1/4" Round shank to adjust tool angle and depth.

Two holes in mounting plate are made for 3/8" carriage bolts, 1-13/16" center-to-center separation.

Shank Length: 23.44"

Includes 2 shanks for right and left spring hoe.
7/8" Round Shank used to adjust tool angle and depth.

Clamp not included.

Includes 2 Flex Tine Mounts and Clamps for a 2x2 Inch square tube.

The Flex Tine Mount (or Flat Shank Flex Mount) mounts to a 2" square toolbar and allows for more independent movement of the arms and more flexibility in rocky conditions.

Includes 2 clamps for right and left spring hoes.
The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 2" square toolbar.
One adjustment bolt secures both horizontal movement of the clamp and vertical movement of the shaft.
Adjustment bolt and nut are easily replaceable when worn. Adjustment bolt pushes against a flat plate to protect toolbar from damage.

Includes 2 clamps for right and left spring hoes.
The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 1.5" square toolbar.
Two bolts secure both horizontal movement of the clamp and vertical movement of the shaft.
With its unique design, this clamp can be removed or added to a toolbar without having to remove additional tooling on the toolbar. It can also be positioned between two welded pieces on a toolbar.

Includes 2 clamps for right and left spring hoes.
The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 2" square toolbar.
Two bolts secure both horizontal movement of the clamp and vertical movement of the shaft.
With its unique design, this clamp can be removed or added to a toolbar without having to remove additional tooling on the toolbar. It can also be positioned between two welded pieces on a toolbar.

Clamp not included.

Includes 2 clamps for right and left spring hoes.
The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 2" square toolbar.
One adjustment bolt secures both horizontal movement of the clamp and vertical movement of the shaft.
Adjustment bolt and nut are easily replaceable when worn. Adjustment bolt pushes against a flat plate to protect toolbar from damage.

Includes 2 clamps for right and left spring hoes.
The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 1.5" square toolbar.
Two bolts secure both horizontal movement of the clamp and vertical movement of the shaft.
With its unique design, this clamp can be removed or added to a toolbar without having to remove additional tooling on the toolbar. It can also be positioned between two welded pieces on a toolbar.

Includes 2 clamps for right and left spring hoes.
The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 2" square toolbar.
Two bolts secure both horizontal movement of the clamp and vertical movement of the shaft.
With its unique design, this clamp can be removed or added to a toolbar without having to remove additional tooling on the toolbar. It can also be positioned between two welded pieces on a toolbar.

Includes 2 Flex Tine Mounts and Clamps for a 2x2 Inch square tube.

The Flex Tine Mount (or Flat Shank Flex Mount) mounts to a 2" square toolbar and allows for more independent movement of the arms and more flexibility in rocky conditions.

Clamp not included.

Includes 2 clamps for right and left spring hoes.
Fits standard rectangular PJ or Thiessen bars.

Includes 2 clamps for right and left spring hoes.
Can be used to attach tooling in the center of the front rectangular walk behind toolbar, or along the sides of the trailing arms.

Includes 2 clamps for right and left spring hoes.
For Thiessen Flat Shanks.

Includes 2 clamps for right and left spring hoes.
Flat shank clamp to place tooling on the middle section of Thiessen Hitch.

Clamp not included.

Includes 2 clamps for right and left spring hoes.
Fabricated plate with U-bolts that hold up to a 1-1/4" round shank and designed to mount on a 2" square tool bar.

Includes 2 clamps for right and left spring hoes.
Easy adjustment of tools and spacing for growers needing to adapt to various crops and conditions. Holds up to an 1-1/4" round shank and designed to mount on a 2" square tool bar.

Clamp not included.

Fabricated plate with U-bolts that hold up to a 1-1/4" round shank and designed to mount on a 2" square tool bar.

Includes 2 clamps for right and left spring hoes.
Easy adjustment of tools and spacing for growers needing to adapt to various crops and conditions. Holds up to an 1-1/4" round shank and designed to mount on a 2" square tool bar.

Includes 2 clamps for right and left spring hoes.
Clamps hiller discs or other tools that use a 7/8” diameter round shank standard to 1/2-5/8 x 1-1/4" toolbars.

Includes 2 clamps for right and left spring hoes.
The Round Shank Clamp fits a 7/8" round shank and mounts it rigidly to the 1.5" square toolbar.

Two bolts secure both horizontal movement of the clamp and vertical movement of the shaft.
With its unique design, this clamp can be removed or added to a toolbar without having to remove additional tooling on the toolbar. It can also be positioned between two welded pieces on a toolbar.

Tool Tip: When installing the clamp on a toolbar, insert the bolts that hold the half-moon plate and spin on the nuts loosely. Tighten the bolts that push the shank against the toolbar securely. Then tighten the nuts that secure the half-moon plate.

Includes 2 clamps for right and left spring hoes.
Round Shank Clamp for 7/8" round shank. Clamps on 1.5" square tube.

Shank not included.

Includes 1 Shank for Spring Hoe.

Pair with flex-tine mounts for greater flexibility in rocky conditions.

Dimensions: 13.56" x 1.19" x .375"

Includes 1 Shank for Right Spring Hoe.

Dimensions: 13.56" x 1.19" x .375" with a .44" offset where the implement mounts.

Includes 1 Shank for Spring Hoe.

For walk-behind toolbars. 
Dimensions: 1/2" x 1-1/4" x 13-3/4"

Includes 1 Shank for Spring Hoe.

1-1/4" Round shank to adjust tool angle and depth.

Two holes in mounting plate are made for 3/8" carriage bolts, 1-13/16" center-to-center separation.

Shank Length: 23.44"

Includes 1 Shank for Spring Hoe.

7/8" Round Shank used to adjust tool angle and depth.

The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 2" square toolbar.
One adjustment bolt secures both horizontal movement of the clamp and vertical movement of the shaft.
Adjustment bolt and nut are easily replaceable when worn. Adjustment bolt pushes against a flat plate to protect toolbar from damage.

Does not fit Steketee, Garford, or Thiessen Tillage Finger Weeder Shanks!

The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 1.5" square toolbar.
Two bolts secure both horizontal movement of the clamp and vertical movement of the shaft.
With its unique design, this clamp can be removed or added to a toolbar without having to remove additional tooling on the toolbar. It can also be positioned between two welded pieces on a toolbar.

Does not fit Steketee, Garford, or Thiessen Tillage Finger Weeder Shanks!

The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 2" square toolbar.
Two bolts secure both horizontal movement of the clamp and vertical movement of the shaft.
With its unique design, this clamp can be removed or added to a toolbar without having to remove additional tooling on the toolbar. It can also be positioned between two welded pieces on a toolbar.

Does not fit Steketee, Garford, or Thiessen Tillage Finger Weeder Shanks!

Includes Flex Tine Mount and Clamp for a 2x2 Inch square tube.

The Flex Tine Mount (or Flat Shank Flex Mount) mounts to a 2" square toolbar and allows for more independent movement of the arms and more flexibility in rocky conditions.

The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 2" square toolbar.
One adjustment bolt secures both horizontal movement of the clamp and vertical movement of the shaft.
Adjustment bolt and nut are easily replaceable when worn. Adjustment bolt pushes against a flat plate to protect toolbar from damage.

Does not fit Steketee, Garford, or Thiessen Tillage Finger Weeder Shanks!

The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 1.5" square toolbar.
Two bolts secure both horizontal movement of the clamp and vertical movement of the shaft.
With its unique design, this clamp can be removed or added to a toolbar without having to remove additional tooling on the toolbar. It can also be positioned between two welded pieces on a toolbar.

Does not fit Steketee, Garford, or Thiessen Tillage Finger Weeder Shanks!

The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 2" square toolbar.
Two bolts secure both horizontal movement of the clamp and vertical movement of the shaft.
With its unique design, this clamp can be removed or added to a toolbar without having to remove additional tooling on the toolbar. It can also be positioned between two welded pieces on a toolbar.

Does not fit Steketee, Garford, or Thiessen Tillage Finger Weeder Shanks!

Includes Flex Tine Mount and Clamp for a 2x2 Inch square tube.

The Flex Tine Mount (or Flat Shank Flex Mount) mounts to a 2" square toolbar and allows for more independent movement of the arms and more flexibility in rocky conditions.

Fits standard rectangular PJ or Thiessen bars.

Can be used to attach tooling in the center of the front rectangular walk behind toolbar, or along the sides of the trailing arms.

For Thiessen Flat Shanks. Will not fit Tilmor red flat shanks!

Flat shank clamp to place tooling on the middle section of Thiessen Hitch.

Fabricated plate with U-bolts that hold up to a 1-1/4" round shank and designed to mount on a 2" square tool bar.

Easy adjustment of tools and spacing for growers needing to adapt to various crops and conditions. Holds up to an 1-1/4" round shank and designed to mount on a 2" square tool bar.

Fabricated plate with U-bolts that hold up to a 1-1/4" round shank and designed to mount on a 2" square tool bar.

Easy adjustment of tools and spacing for growers needing to adapt to various crops and conditions. Holds up to an 1-1/4" round shank and designed to mount on a 2" square tool bar.

Clamps hiller discs or other tools that use a 7/8” diameter round shank standard to 1/2-5/8 x 1-1/4" toolbars.

The Round Shank Clamp fits a 7/8" round shank and mounts it rigidly to the 1.5" square toolbar.

Two bolts secure both horizontal movement of the clamp and vertical movement of the shaft.
With its unique design, this clamp can be removed or added to a toolbar without having to remove additional tooling on the toolbar. It can also be positioned between two welded pieces on a toolbar.

Tool Tip: When installing the clamp on a toolbar, insert the bolts that hold the half-moon plate and spin on the nuts loosely. Tighten the bolts that push the shank against the toolbar securely. Then tighten the nuts that secure the half-moon plate.

Round Shank Clamp for 7/8" round shank.
Clamps on 1.5" square tube.

Shank not included.

Includes 1 Shank for Spring Hoe.

Pair with flex-tine mounts for greater flexibility in rocky conditions.

Dimensions: 13.56" x 1.19" x .375"

Includes 1 Shank for Spring Hoe.

Dimensions: 13.56" x 1.19" x .375" with a .44" offset where the implement mounts.

Includes 1 Shank for Spring Hoe.

For walk-behind toolbars. 
Dimensions: 1/2" x 1-1/4" x 13-3/4"

Includes 1 Shank for Spring Hoe.

1-1/4" Round shank to adjust tool angle and depth.

Two holes in mounting plate are made for 3/8" carriage bolts, 1-13/16" center-to-center separation.

Shank Length: 23.44"

Includes 1 Shank for Spring Hoe.

7/8" Round Shank used to adjust tool angle and depth.

The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 2" square toolbar.
One adjustment bolt secures both horizontal movement of the clamp and vertical movement of the shaft.
Adjustment bolt and nut are easily replaceable when worn. Adjustment bolt pushes against a flat plate to protect toolbar from damage.

Does not fit Steketee, Garford, or Thiessen Tillage Finger Weeder Shanks!

The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 1.5" square toolbar.
Two bolts secure both horizontal movement of the clamp and vertical movement of the shaft.
With its unique design, this clamp can be removed or added to a toolbar without having to remove additional tooling on the toolbar. It can also be positioned between two welded pieces on a toolbar.

Does not fit Steketee, Garford, or Thiessen Tillage Finger Weeder Shanks!

The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 2" square toolbar.
Two bolts secure both horizontal movement of the clamp and vertical movement of the shaft.
With its unique design, this clamp can be removed or added to a toolbar without having to remove additional tooling on the toolbar. It can also be positioned between two welded pieces on a toolbar.

Does not fit Steketee, Garford, or Thiessen Tillage Finger Weeder Shanks!

Includes Flex Tine Mount and Clamp for a 2x2 Inch square tube.

The Flex Tine Mount (or Flat Shank Flex Mount) mounts to a 2" square toolbar and allows for more independent movement of the arms and more flexibility in rocky conditions.

The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 2" square toolbar.
One adjustment bolt secures both horizontal movement of the clamp and vertical movement of the shaft.
Adjustment bolt and nut are easily replaceable when worn. Adjustment bolt pushes against a flat plate to protect toolbar from damage.

Does not fit Steketee, Garford, or Thiessen Tillage Finger Weeder Shanks!

The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 1.5" square toolbar.
Two bolts secure both horizontal movement of the clamp and vertical movement of the shaft.
With its unique design, this clamp can be removed or added to a toolbar without having to remove additional tooling on the toolbar. It can also be positioned between two welded pieces on a toolbar.

Does not fit Steketee, Garford, or Thiessen Tillage Finger Weeder Shanks!

The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 2" square toolbar.
Two bolts secure both horizontal movement of the clamp and vertical movement of the shaft.
With its unique design, this clamp can be removed or added to a toolbar without having to remove additional tooling on the toolbar. It can also be positioned between two welded pieces on a toolbar.

Does not fit Steketee, Garford, or Thiessen Tillage Finger Weeder Shanks!

Includes Flex Tine Mount and Clamp for a 2x2 Inch square tube.

The Flex Tine Mount (or Flat Shank Flex Mount) mounts to a 2" square toolbar and allows for more independent movement of the arms and more flexibility in rocky conditions.

Fits standard rectangular PJ or Thiessen bars.

Can be used to attach tooling in the center of the front rectangular walk behind toolbar, or along the sides of the trailing arms.

For Thiessen Flat Shanks. Will not fit Tilmor red flat shanks!

Flat shank clamp to place tooling on the middle section of Thiessen Hitch.

Fabricated plate with U-bolts that hold up to a 1-1/4" round shank and designed to mount on a 2" square tool bar.

Easy adjustment of tools and spacing for growers needing to adapt to various crops and conditions. Holds up to an 1-1/4" round shank and designed to mount on a 2" square tool bar.

Fabricated plate with U-bolts that hold up to a 1-1/4" round shank and designed to mount on a 2" square tool bar.

Easy adjustment of tools and spacing for growers needing to adapt to various crops and conditions. Holds up to an 1-1/4" round shank and designed to mount on a 2" square tool bar.

Clamps hiller discs or other tools that use a 7/8” diameter round shank standard to 1/2-5/8 x 1-1/4" toolbars.

The Round Shank Clamp fits a 7/8" round shank and mounts it rigidly to the 1.5" square toolbar.

Two bolts secure both horizontal movement of the clamp and vertical movement of the shaft.
With its unique design, this clamp can be removed or added to a toolbar without having to remove additional tooling on the toolbar. It can also be positioned between two welded pieces on a toolbar.

Tool Tip: When installing the clamp on a toolbar, insert the bolts that hold the half-moon plate and spin on the nuts loosely. Tighten the bolts that push the shank against the toolbar securely. Then tighten the nuts that secure the half-moon plate.

Round Shank Clamp for 7/8" round shank.
Clamps on 1.5" square tube.